Have You Remembered to Inspect Your Baler? Outdoor/Heavy Duty Usage, 60cm Diameter
A companion sign for our Pre-Use Inspection safety range reminding operators to safety check their baler before use. Available in small sticker formats to place on baler body or larger signage footprints to position in baler area.
SG World’s heavy duty floor graphics are ideal for signage on surfaces such as asphalt, concrete and stone for outdoor use or areas experiencing frequent, heavy traffic. It is easy to apply and is easily removable after usage. Fire rated according to DIN EN-13501-1 the laminated material is also resistant to water and most petroleum based oils, greases and aliphatic solvents, mild acids, alkalis and salts, lasting up to 6 months outdoors in middle European climate, depending on mechanical load. The 125 micron film has a anti slip structured surface that has been tested for slip resistance according to ASTM and DIN 51130 R9 and has an insurance warranty against injury. See our Materials Guide for more information on how to choose the right material for your floor graphic.
SG World floor signs are manufactured using an ultra-tough polyester film with zero stretch, enabling very accurate placement. Installation must be undertaken as follows.
- The floor must be clean, dry, smooth and all dust and debris removed.
- Hold at circa 25 degrees to the floor and keep a firm tension, whilst a colleague applies firm pressure to apply the graphic to the floor.
- Use light and steady pressure
- Once sign is placed please keep free from foot traffic, ideally for at least 12 hours to allow adhesive to bond